Planet IGSW-2840 User Manual page 413

This view includes the MIB-2 interfaces table, and the mask selects all index entries.
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#
show snmp view
This command shows information on the SNMP views.
Command Mode
Privileged Exec
Example
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active
Console#
Field
View Name
Subtree OID
View Type
Storage Type
Row Status
snmp-server group
This command adds an SNMP group, mapping SNMP users to SNMP views. Use the no form to remove an SNMP group.
Syntax
snmp-server group groupname {v1 | v2c | v3 {auth | noauth | priv}} [read readview] [write writeview] [notify notifyview] no
Description
Name of an SNMP view.
A branch in the MIB tree.
Indicates if the view is included or excluded.
The storage type for this entry.
The row status of this entry.
Table 5-23 show snmp view - display description
413
User's Manual of IGSW-2840