Planet IGSW-2840 User Manual page 176

VLANs are dynamically configured based on join messages issued by host devices and propagated throughout the network.
GVRP must be enabled to permit automatic VLAN registration, and to support VLANs which extend beyond the local switch.
The page includes the following fields:
Object
• GVRP
4.8.1.3 VLAN Current Table
This page shows the current port members of each VLAN and whether or not the port supports VLAN tagging. Ports assigned to
a large VLAN group that crosses several switches should use VLAN tagging. However, if you just want to create a small
Figure 4-8-2 GVRP Status screenshot
Description
Enables and disables GVRP on the device
(Default: Disabled)
176
User's Manual of IGSW-2840