Web Configuration - Planet IGSW-2840 User Manual

This section introduces the configuration and functions of the Web-Based management.
About Web-based Management
The Industrial Managed Switch offers management features that allow users to manage the Industrial Managed Switch from
anywhere on the network through a standard browser such as Microsoft Internet Explorer.
The Web-Based Management supports Internet Explorer 6.0 or later version. It is based on Java Applets with an aim to reduce
network bandwidth consumption, enhance access speed and present an easy viewing screen.
By default, IE6.0 or later version does not allow Java Applets to open sockets. User has to modify
the browser setting to enable Java Applets to use network ports.
The Industrial Managed Switch can be configured through an Ethernet connection, make sure the manager PC must be set on
same the IP subnet address with the Industrial Managed Switch.
For example, the default IP address of the IGSW-2840 Industrial Managed Switch is 192.168.0.100, then the manager PC
should be set at 192.168.0.x (where x is a range of the number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
If you have changed the default IP address of the Industrial Managed Switch to 192.168.1.1 with subnet mask 255.255.255.0
via console, then the manager PC should be set at 192.168.1.x (where x is a range of the number between 2 and 254) to do the
relative configuration on manager PC.

4. WEB CONFIGURATION

Figure 4-1-1 Web Management
46
User's Manual of IGSW-2840