Planet IGSW-2840 User Manual page 402

Command Mode
Global Configuration
Command Usage
The maximum number of cluster Members is 36.
The maximum number of switch Candidates is 100.
Example
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5
Console(config)#
rcommand
This command provides access to a cluster Member CLI for configuration.
Syntax
rcommand id member-id member-id - The ID number of the Member switch. (Range: 1-36)
Command Mode
Privileged Exec
Command Usage
This command only operates through a Telnet connection to the Commander switch. Managing cluster Members using
the local console CLI on the Commander is not supported.
There is no need to enter the username and password for access to the Member switch CLI.
Example
Vty-0#rcommand id 1
CLI session with the 24/48 L2/L4 GE Switch is opened.
To end the CLI session, enter [Exit].
Vty-0#
show cluster
This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
Console#show cluster
Role: commander
402
User's Manual of IGSW-2840