Planet IGSW-2840 User Manual page 271

4.11.6.9 AAA Accounting Statistics Summary
Object
User Name
Interface
Time Elapsed
4.11.6.10 Authorization Settings
AAA authorization is used to verify that a user has access to specific services.
Click Security  AAA  Authorization  Settings. To configure a new authorization method, specify a method name and a
group name, select the service, then click Add.
The page includes the following fields:
Object
Method Name
Service Request
Group Name
Description
Displays a registered user name.
Displays the receive port number through which this user accessed the switch.
Displays the length of time this entry has been active.
Figure 4-11-13 AAA Authorization Settings screenshot
Description
Specifies an authorization method for service requests.
The "default" method is used for a requested service if no other methods have
been defined.
(Range: 1-255 characters)
Specifies the service as Exec (authorization for local console or Telnet
connections).
Specifies the authorization server group.
(Range: 1-255 characters)
The group name "tacacs+" specifies all configured TACACS+ hosts (see
"Configuring Local/Remote Logon
refers to a server group configured on the TACACS+ Group Settings page.
Authorization is only supported for TACACS+ servers.
271
User's Manual of IGSW-2840
Authentication"). Any other group name