4.11.14.1 ACL Configuration
Use the ACL Configuration page to designate the name and type of an ACL.
Select Security ACL Configuration.
Enter an ACL name in the Name field, select the list type (IP Standard, IP Extended, or MAC), and click Add to open the
configuration page for the new list.
The page includes the following fields:
Object
Name
Type
Figure 4-11-38 ACL Configuration screenshot
Description
Name of the ACL.
(Maximum length: 15 characters)
There are three filtering modes:
--Standard
IP ACL mode that filters packets based on the source IP
address.
–- Extended
IP ACL mode that filters packets based on source or destination
IP address, as well as protocol type and protocol port number. If
the "TCP" protocol is specified, then you can also filter packets
based on the TCP control code.
–- MAC
MAC ACL mode that filters packets based on the source or
destination MAC address and the Ethernet frame type (RFC
1060).
309
User's Manual of IGSW-2840