Planet IGSW-2840 User Manual page 305

4.11.13.2 Network Access Port Configuration
Configures MAC authentication on switch ports, including setting the maximum MAC count, applying a MAC address filter, and
enabling dynamic VLAN assignment.
The page includes the following fields:
Object
Mode
Maximum MAC Count
Guest VLAN
Figure 4-11-36 Network Access Port Configuration screenshot
Description
Enables MAC authentication on a port.
(Default: None)
Sets the maximum number of MAC addresses that can be authenticated on a
port. The maximum number of MAC addresses per port is 2048, and the
maximum number of secure MAC addresses supported for the switch system is
1024. When the limit is reached, all new MAC addresses are treated as an
authentication failure.
(Range: 1-1024; Default: 1024)
Specifies the VLAN to be assigned to the port when MAC Authentication through
802.1X fails.
(Default: Disabled; Range: 1-4094)
The VLAN must already be created and active (see "Creating VLANs"). Also,
when used with 802.1X authentication, intrusion action must be set for "Guest
VLAN" (see "Configuring Port Settings for 802.1X")
305
User's Manual of IGSW-2840