Table of Contents
Advertisement
4.11.14.4 MAC ACL
Egress MAC ACLs only work for destination-mac-known packets, not for multicast, broadcast, or destination-mac-unknown
packets.
1.
Specify the action (i.e., Permit or Deny).
2.
Specify the source and/or destination addresses.
3.
Select the address type (Any, Host, or MAC).
4.
If you select "Host," enter a specific address (e.g., 11-22-33-44-55-66).
5.
If you select "MAC," enter a base address and a hexadecimal bitmask for an address range.
6.
Set any other required criteria, such as VID, Ethernet type, or packet format.
7.
Then click Add.
The page includes the following fields:
Object
Action
Source/Destination
Address Type
Figure 4-11-42 MAC ACL screenshot
Description
An ACL can contain any combination of permit or deny rules.
Use "Any" to include all possible addresses, "Host" to indicate a specific MAC
address, or "MAC" to specify an address range with the Address and Bitmask
fields. (Options: Any, Host, MAC; Default: Any)
313
User's Manual of IGSW-2840
Advertisement
Chapters
Table of Contents
