Planet IGSW-2840 User Manual page 436

aaa accounting update
This command enables the sending of periodic updates to the accounting server. Use the no form to disable accounting
updates.
Syntax
aaa accounting update [periodic interval] no aaa accounting update
interval -Sends an interim accounting record to the server at this interval. (Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
When accounting updates are enabled, the switch issues periodic interim accounting records for all users on the system.
Using the command without specifying an interim interval enables updates, but does not change the current interval
setting.
Example
Console(config)# aaa accounting update periodic 30
Console(config)#
accounting dot1x
This command applies an accounting method for 802.1X service requests on an interface. Use the no form to disable
accounting on the interface.
Syntax
accounting dot1x {default | list-name} no accounting dot1x default -Specifies the default method list created with the aaa
accounting dot1x command (page 4-98).
list-name - Specifies a method list created with the aaa accounting dot1x command.
Default Setting
None
Command Mode
Interface Configuration
Example
Console(config)# interface ethernet 1/2
Console(config-if)# accounting dot1x tps
Console(config-if)#
436
User's Manual of IGSW-2840