Planet IGSW-2840 User Manual page 230

4.10.1.1 Port Priority Configuration
You can specify the default port priority for each interface on the Industrial Managed Switch. All untagged packets entering the
Industrial Managed Switch are tagged with the specified default port priority, and then sorted into the appropriate egress queue
at the output port.
• This Industrial Managed Switch provides four egress queues for each port. It uses Weighted Round Robin to prevent
head-of-queue blockage.
• The default priority applies for an untagged frame received on a port set to accept all frame types (i.e., receives both
untagged and tagged frames). This priority does not apply to IEEE 802.1Q VLAN tagged frames. If the incoming frame is an
IEEE 802.1Q VLAN tagged frame, the IEEE 802.1p User Priority bits will be used.
• If the output port is an untagged member of the associated VLAN, these frames are stripped of all VLAN tags prior to
transmission.
The page includes the following fields:
Object
• Port
• Default Priority
• Number of Egress
Traffic Classes
• Trunk
Figure 4-10-1 Default Port Priority screenshot
Description
Numeric identifier for the Industrial Managed Switch port.
The priority that is assigned to untagged frames received on the specified
interface. Range: 0-7;
Default: 0
The number of queue buffers provided for each port.
The trunk identifier. (Port Priority Configuration only)
230
User's Manual of IGSW-2840