Planet IGSW-2840 User Manual page 588

Command Mode
Global Configuration
Example
Console(config)#lldp
Console(config)#
lldp holdtime-multiplier
This command configures the time-to-live (TTL) value sent in LLDP advertisements. Use the no form to restore the
Setting
.
Syntax
lldp holdtime-multiplier value
no lldp holdtime-multiplier
value - Calculates the TTL in seconds based on
(holdtime-multiplier * refresh-interval) ≤ 65536
(Range: 2 - 10)
Default Setting
Holdtime multiplier: 4
TTL: 4*30 = 120 seconds
Command Mode
Global Configuration
Command Usage
The time-to-live tells the receiving LLDP agent how long to retain all information pertaining to the sending LLDP agent if it
does not transmit updates in a timely manner.
Example
Console(config)#lldp holdtime-multiplier 10
Console(config)#
lldp medFastStartCount
This command specifies the amount of MED Fast Start LLDPDUs to transmit during the activation process of the LLDP-MED
Fast Start mechanism.
Syntax
lldp medfaststartcount packets seconds - Amount of packets. (Range: 1-10 packets; Default: 4 packets)
Default Setting
588
User's Manual of IGSW-2840
Default