Planet IGSW-2840 User Manual page 311

4.11.14.3 Extended ACL
Specify the action (i.e., Permit or Deny). Specify the source and/or destination addresses. Select the address type (Any, Host, or
IP). If you select "Host," enter a specific address. If you select "IP," enter a subnet address and the mask for an address range.
Set any other required criteria, such as service type, protocol type, or TCP control code. Then click Add.
Figure 4-11-40 Standard ACL Settings screenshot
Figure 4-11-41 Standard ACL Settings screenshot
311
User's Manual of IGSW-2840