Rack Mounting - Planet IGSW-2840 User Manual

2.2.2 Rack Mounting

To install the Industrial Managed Switch in a 19-inch standard rack, please follows the instructions described below.
Step1: Place the Industrial Managed Switch on a hard flat surface, with the front panel positioned towards the front side.
Step2: Attach the rack-mount bracket to each side of the Industrial Managed Switch with supplied screws attached to the
package.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to the opposite side.
Step5: After the brackets are attached to the Industrial Managed Switch, use suitable screws to securely attach the brackets to
the rack..
Figure 2-5 Attach brackets to the Industrial Managed Switch.
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate the warranty.
Figure 2-6 Mounting Industrial Managed Switch in a Rack
35
User's Manual of IGSW-2840