Planet IGSW-2840 User Manual page 655

show ip redirects
ip dhcp restart
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command issues a BOOTP or DHCP client request for any IP interface that has been set to BOOTP or DHCP mode
via the ip address command.
DHCP requires the server to reassign the client's last address if available.
If the BOOTP or DHCP server has been moved to a different domain, the network portion of the address provided to the
client will be based on this new domain.
Example
In the following example, the device is reassigned the same address.
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#end
Console#ip dhcp restart
Console#show ip interface
IP address and netmask: 192.168.1.54 255.255.255.0 on VLAN 1,
and address mode: DHCP.
Console#
Related Commands
ip address
show ip interface
This command displays the settings of an IP interface.
Default Setting
All interfaces
Command Mode
Privileged Exec
655
User's Manual of IGSW-2840