Planet IGSW-2840 User Manual page 385

logging facility
logging trap
clear log
logging on
This command controls logging of error messages, sending debug or error messages to switch memory. The no form disables
the logging process.
Syntax
[no] logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory or sent to remote syslog servers. You can use the
logging history command to control the type of error messages that are stored in memory. You can use the logging trap
command to control the type of error messages that are sent to specified syslog servers.
Example
Console(config)#logging on
Console(config)#
Related Commands
logging history
logging trap
clear log
logging history
This command limits syslog messages saved to switch memory based on severity. The no form returns the logging of syslog
messages to the default level.
Syntax
logging history {flash | ram} level
no logging history {flash | ram}
flash - Event history stored in flash memory (i.e., permanent memory).
messages
Sets the facility type for remote logging of syslog messages
Limits syslog messages saved to a remote server based on
severity
Clears messages from the logging buffer
Table 5-14 Event Logging Commands
385
User's Manual of IGSW-2840
GC
GC
PE