Planet IGSW-2840 User Manual page 543

Example
Console(config-mstp)#max-hops 30
Console(config-mstp)#
spanning-tree spanning-disabled
This command disables the spanning tree algorithm for the specified interface. Use the no form to reenable the spanning tree
algorithm for the specified interface.
Syntax
[no] spanning-tree spanning-disabled
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
This example disables the spanning tree algorithm for port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree spanning-disabled
Console(config-if)#
spanning-tree cost
This command configures the spanning tree path cost for the specified interface. Use the no form to restore the default.
Syntax
spanning-tree cost cost no spanning-tree cost
(Range: 0 for auto-configuration, 1-65535 for short path cost method23, 1-200,000,000 for long path cost method)
Use the spanning-tree pathcost method command on page 4-206 to set the path cost method.
Port Type
Ethernet
Port Type IEEE 802.1D-1998
Ethernet 50-600
Fast Ethernet 10-60
Gigabit Ethernet 3-10
Table 5-63 Recommended STA Path Cost Range
Link Type
Half
DuplexFull
DuplexTrunk
IEEE 802.1w-2001
200,000-20,000,000
20,000-2,000,000
2,000-200,000
IEEE 802.1D-1998 IEEE 802.1w-2001
100 2,000,000
95 1,999,999
90 1,000,000
543
User's Manual of IGSW-2840