Address Group Add/Edit Screen - ZyXEL Communications ZyWall USG 2000 User Manual

38.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group
or edit an existing one. To access this screen, go to the Address Group screen
(see Section 38.3 on page
Figure 425 Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 194 Object > Address > Address Group > Add
LABEL
Name
Description
Available
Member
OK
Cancel
ZyWALL USG 2000 User's Guide
634), and click either the Add icon or an Edit icon.
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric
characters, underscores(
be a number. This value is case-sensitive.
This field displays the description of each address group, if any. You can
use up to 60 characters, punctuation marks, and spaces.
This field displays the names of the address and address group objects
that can be added to the address group.
Select address and address group objects that you want to be members
of this group and click the right arrow to add them to the member list.
This field displays the names of the address and address group objects
that have been added to the address group. The order of members is not
important. To remove members, select them and click the left arrow.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
), or dashes (-), but the first character cannot
_
Chapter 38 Addresses
635