Log Setting Summary - ZyXEL Communications ZyWall USG 2000 User Manual

48.4.1 Log Setting Summary

To access this screen, click Maintenance > Log > Log Setting.
Figure 518 Maintenance > Log > Log Setting
The following table describes the labels in this screen.
Table 247 Maintenance > Log > Log Setting
LABEL
#
Name
Log Format
Summary
Modify
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field is a sequential value, and it is not associated with a specific
log.
This field displays the name of the log (system log or one of the remote
servers).
This field displays the format of the log.
Internal - system log; you can view the log on the View Log tab.
VRPT/Syslog - ZyXEL's Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
This field is a summary of the settings for each log. Please see
48.4.2 on page 768 for more information.
This column provides icons to activate or deactivate logs and to modify
the settings.
To activate or deactivate a log, click the Active icon. Make sure you click
Apply to save and apply the change.
To edit the settings, click the Edit icon next to the associated log. The
Log Settings Edit screen appears.
Chapter 48 Logs
Section
767