How To Upload A Custom Logo - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 22 SSL VPN
Table 119 VPN > SSL VPN > Global Setting (continued)
LABEL
Reset Logo to
Default
Apply
Reset

22.4.1 How to Upload a Custom Logo

Follow the steps below to upload a custom logo to display on the remote user SSL
VPN screens.
Click VPN > SSL VPN and click the Global Setting tab to display the
1
configuration screen.
Click Browse to locate the logo graphic. Make sure the file is in GIF, JPG, or PNG
2
format.
Click Apply to start the file transfer process.
3
Log in as a user to verify that the new logo displays properly.
4
The following shows an example logo on the remote user screen.
Figure 234 Example Logo Graphic Display
380
DESCRIPTION
Click Reset Logo to Default to display the ZyXEL company logo on the
remote user's web browser.
Click Apply to save the changes and/or start the logo file upload
process.
Click Reset to start configuring this screen again.
ZyWALL USG 2000 User's Guide