Address Group Add/Edit Screen - ZyXEL Communications UAG5100 User Manual

The following table describes the labels in this screen. See
information as well.
Table 162 Configuration > Object > Address > Address Group
LABEL
Configuration
Add
Edit
Remove
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Description

34.3.1 Address Group Add/Edit Screen

The Address Group Add/Edit screen allows you to create a new address group or edit an existing
one. To access this screen, go to the Address Group screen (see
either click the Add icon or select an entry and click the Edit icon in the Configuration section.
Figure 236 Configuration > Object > Address > Address Group > Add/Edit
Chapter 34 Addresses
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
use the entry. See Section 10.3.2 on page 129
This field is a sequential value, and it is not associated with a specific address group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
UAG5100 User's Guide
357
Section 34.3.1 on page 357
for an example.
Section 34.3 on page
for more
356), and