ZyXEL Communications ZyWall USG 2000 User Manual page 849

Table 282 Built-in Services Logs (continued)
LOG MESSAGE
Console baud has been
reset to %d.
DHCP Server on
Interface %s will not
work due to Device HA
status is Stand-By
DHCP Server on
Interface %s will be
reapplied due to
Device HA status is
Active
DHCP's DNS option:%s
has changed.
Set timezone to %s.
Set timezone to
default.
Enable daylight
saving.
Disable daylight
saving.
DNS access control
rules have been
reached the maximum
number.
DNS access control
rule %u of DNS has
been appended.
DNS access control
rule %u has been
inserted.
DNS access control
rule %u has been
appended
DNS access control
rule %u has been
modified
DNS access control
rule %u has been
deleted.
ZyWALL USG 2000 User's Guide
DESCRIPTION
An administrator changed the console port baud rate back to
the default (115200).
%d is default baud rate
If interface is stand-by mode for device HA, DHCP server
can't be run. Otherwise it has conflict with the interface in
master mode.
%s is interface name
When an interface has become the HA master, the DHCP
server needs to start operating.
%s is interface name
DHCP pool's DNS option support from WAN interface. If this
interface is unlink/disconnect or link/connect, this log will be
shown.
%s is interface name. The DNS option of DHCP pool has
retrieved from it
An administrator changed the time zone.
%s is time zone value
An administrator changed the time zone back to the default
(0).
An administrator turned on daylight saving.
An administrator turned off daylight saving.
An administrator tried to add more than the maximum
number of DNS access control rules (64).
An administrator added a new rule.
%u is rule number
An administrator inserted a new rule.
%u is rule number
An administrator appended a new rule.
%u is rule number
An administrator modified the rule %u.
%u is rule number
An administrator removed the rule %u.
%u is rule number
Appendix A Log Descriptions
849