The Firmware Package Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Unified security gateway

Hide thumbs Also See for ZyWall USG 2000:

Table of Contents

Chapter 47 File Manager

Table 243 Maintenance > File Manager > Configuration File (continued)

47.3 The Firmware Package Screen

Click Maintenance > File Manager > Firmware Package to open the

Firmware Package screen. Use the Firmware Package screen to check your

current firmware version and upload firmware to the ZyWALL.

Note: The Web Configurator is the recommended method for uploading firmware. You

only need to use the command line interface if you need to recover the

firmware. See the CLI Reference Guide for how to determine if you need to

recover the firmware and how to recover it.

Find the firmware package at www.zyxel.com in a file that (usually) uses the

system model name with a .bin extension, for example, "zywall.bin".

The ZyWALL's firmware package cannot go through the ZyWALL when you enable

the anti-virus Destroy compressed files that could not be decompressed

option. The ZyWALL classifies the firmware package as not being able to be

decompressed and deletes it. You can upload the firmware package to the

ZyWALL with the option enabled, so you only need to clear the Destroy

compressed files that could not be decompressed option while you download

the firmware package. See

Destroy compressed files that could not be decompressed option.

Click Browse... to find the .conf file you want to upload. The configuration

file must use a ".conf" filename extension. You will receive an error

message if you try to upload a fie of a different format. Remember that you

must decompress compressed (.zip) files before you can upload them.

Click Upload to begin the upload process. This process may take up to two

Section 30.2.1 on page 477

for more on the anti-virus

ZyWALL USG 2000 User's Guide

Zywall usg 1000