The Application Patrol Policy Edit Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Table 130 Application Edit (continued)
LABEL
BWM
Log
Add icon
OK
Cancel

29.3.2 The Application Patrol Policy Edit Screen

The Application Policy Edit screen allows you to edit a group of settings for an
application. To access this screen, go to the application patrol Common, Instant
Messenger, Peer to Peer, VoIP, or Streaming screen and click an application's
ZyWALL USG 2000 User's Guide
DESCRIPTION
These fields show the amount of bandwidth the application's traffic that
matches the policy can use. These fields only apply when Access is set
to forward.
In - This is how much inbound bandwidth, in kilobits per second, this
policy allows the application to use. Inbound refers to the traffic the
ZyWALL sends to a connection's initiator. If no displays here, this policy
does not apply bandwidth management for the application's incoming
traffic.
Out - This is how much outbound bandwidth, in kilobits per second, this
policy allows the application to use. Outbound refers to the traffic the
ZyWALL sends out from a connection's initiator. If no displays here, this
policy does not apply bandwidth management for the application's
outgoing traffic.
Pri - This is the priority for this application's traffic that matches this
policy. The smaller the number, the higher the priority. The traffic of an
application with higher priority is given bandwidth before traffic of an
application with lower priority. The ZyWALL ignores this number if the
incoming and outgoing limits are both set to 0. In this case the traffic is
automatically treated as being set to the lowest priority (7) regardless of
this field's configuration.
This field shows whether the ZyWALL generates a log (log), a log and
alert (log alert) or neither (no) when the application's traffic matches
this policy.
Click the Add icon in the heading row to add a new first entry.
The Active icon displays whether the entry is enabled or not. Click the
Active icon to activate or deactivate the entry. Make sure you click
Apply to save and apply the change.
Click the Edit icon to go to the screen where you can edit the entry.
Click the Add icon in an entry to add a new entry below the current
entry.
Click the Remove icon to delete an existing entry from the ZyWALL. A
window displays asking you to confirm that you want to delete the entry.
To move an entry up or down in the list, click on the Move to N icon
next to the entry, and type the line number (# field) of where you want
to move the entry. The # field is updated accordingly. The ordering of
the entries is important as they are applied in order of their numbering.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 29 Application Patrol
457