The Session Limit Edit Screen - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 20 Firewall
Table 102 Firewall > Session Limit (continued)
LABEL
Address
Limit
Add icon
Apply
Reset

20.3.1 The Session Limit Edit Screen

Click Firewall > Session Limit and the Add or Edit icon to display the Firewall
Session Limit Edit screen. Use this screen to configure rules that define a
session limit for specific users or addresses.
Figure 208
324
DESCRIPTION
This is the address object to which this session limit rule applies.
This is how many concurrent sessions this user or address is allowed to
have.
Click the Add icon in the heading row to add a new first entry.
The Active icon displays whether the rule is enabled or not. Click it to
activate or deactivate the rule. Make sure you click Apply to save and
apply the change.
Click the Edit icon to go to the screen where you can edit the rule on
the ZyWALL.
Click the Add icon in an entry to add a rule below the current entry.
Click the Remove icon to delete an existing rule from the ZyWALL. A
window displays asking you to confirm that you want to delete the rule.
Note that subsequent rules move up by one when you take this action.
In a numbered list, click the Move to N icon to display a field to type an
index number for where you want to put that rule and press [ENTER] to
move the rule to the number that you typed. For example, if you type 6,
the rule you are moving becomes number 6 and the previous rule 6 (if
there is one) gets pushed up (or down) one.
The ordering of your rules is important as they are applied in order of
their numbering.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Firewall > Session Limit > Edit
ZyWALL USG 2000 User's Guide