(see
Section 40.2 on page
the Recurring section.
Figure 432 Object > Schedule > Edit (Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are
disabled in this screen. The following table describes the remaining labels in this
screen.
Table 201 Object > Schedule > Edit (Recurring)
LABEL
Configuration
Name
Date Time
Start
ZyWALL USG 2000 User's Guide
644), and click either the Add icon or an Edit icon in
DESCRIPTION
Type the name used to refer to the recurring schedule. You may use 1-
31 alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
Type the hour and minute when the schedule begins each day.
Year - disabled
Month - disabled
Day - disabled
Hour - 0 - 23
Minute - 0 - 59
The Hour and Minute fields are both required.
To set all day (24 hours), configure the start hour and minute both to 0.
Chapter 40 Schedules
), or dashes (-), but the first
_
647