The Registration Screen - ZyXEL Communications ZyWall USG 2000 User Manual

8.2 The Registration Screen

Use this screen to register your ZyWALL with myZyXEL.com and activate a
service, such as content filtering. Click Licensing > Registration in the
navigation panel to open the screen as shown next.
Figure 111 Licensing > Registration
The following table describes the labels in this screen.
Table 39 Licensing > Registration
LABEL
General Setup
new myZyXEL.com
account
existing
myZyXEL.com
account
UserName
Check
Password
Confirm Password
E-Mail Address
ZyWALL USG 2000 User's Guide
DESCRIPTION
If you select existing myZyXEL.com account, only the User
Name and Password fields are available.
If you haven't created an account at myZyXEL.com, select this
option and configure the following fields to create an account and
register your ZyWALL.
If you already have an account at myZyXEL.com, select this option
and enter your user name and password in the fields below to
register your ZyWALL.
Enter a user name for your myZyXEL.com account. The name
should be from six to 20 alphanumeric characters (and the
underscore). Spaces are not allowed.
Click this button to check with the myZyXEL.com database to
verify the user name you entered has not been used.
Enter a password of between six and 20 alphanumeric characters
(and the underscore). Spaces are not allowed.
Enter the password again for confirmation.
Enter your e-mail address. You can use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without
spaces.
Chapter 8 Registration
155