Chapter 22 SSL VPN
Table 118 VPN > SSL VPN > Connection Monitor (continued)
LABEL
Outbound
(Bytes)
Action
Refresh
22.4 The SSL Global Setting Screen
Click VPN > SSL VPN and click the Global Setting tab to display the following
screen. Use this screen to set the IP address of the ZyWALL (or a gateway device)
on your network for full tunnel mode access, enter access messages or upload a
custom logo to be displayed on the remote user screen.
Figure 232 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
Table 119 VPN > SSL VPN > Global Setting
LABEL
Global Setting
Network
Extension Local
IP
SSL VPN Login
Domain Name
378
DESCRIPTION
This field displays the number of bytes transmitted by the ZyWALL on
this connection.
Click the icon to terminate the connection of the user and delete
corresponding session information from the ZyWALL.
Click Refresh to update this screen.
DESCRIPTION
Specify the IP address of the ZyWALL (or a gateway device) for full
tunnel mode SSL VPN access.
Leave this field to the default settings unless it conflicts with another
interface.
ZyWALL USG 2000 User's Guide