ZyXEL Communications ZyWall USG 2000 User Manual page 117

configure the ZyWALL to use the authentication method. Finally, force users to log
in to the ZyWALL before it routes traffic for them.
Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server,
1
and click Apply.
Figure 65 Object > AAA Server > RADIUS > Default
Click Object > Auth. method. Click the Add icon.
2
Give the new authentication method object a descriptive name, and click the Add
3
icon. Select group radius because the ZyWALL should use the specified RADIUS
server for authentication. Click OK.
Figure 66 Object > Auth. method > Add
Click System > WWW. In the Authentication section, select the new
4
authentication method in the Client Authentication Method field. Click Apply.
Figure 67 System > WWW (Authentication)
Click Object > User/Group > Setting. In the Force User Authentication
5
Policy section, click the Add icon.
Set up a default policy that forces every user to log in to the ZyWALL before the
6
ZyWALL routes traffic for them. Select Enable. Then, select force in the
Authentication field. Keep the rest of the default settings, and click OK.
ZyWALL USG 2000 User's Guide
Chapter 6 Tutorials
117