ZyXEL Communications ZyWall USG 2000 User Manual page 718

Chapter 46 System
Table 231 System > WWW > Service Control (continued)
LABEL
Server
Certificate
Redirect HTTP
to HTTPS
Admin/User
Service
Control
#
Zone
Address
Action
Add icon
HTTP
Enable
Server Port
718
DESCRIPTION
Select a certificate the HTTPS server (the ZyWALL) uses to authenticate
itself to the HTTPS client. You must have certificates already configured
in the My Certificates screen.
To allow only secure Web Configurator access, select this to redirect all
HTTP connection requests to the HTTPS server.
Admin Service Control specifies from which zones an administrator can
use HTTPS to manage the ZyWALL (using the Web Configurator). You
can also specify the IP addresses from which the administrators can
manage the ZyWALL.
User Service Control specifies from which zones a user can use HTTPS
to log into the ZyWALL (to log into SSL VPN for example). You can also
specify the IP addresses from which the users can access the ZyWALL.
This is the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the ZyWALL's (non-
configurable) default policy. The ZyWALL applies this to traffic that does
not match any other configured rule. It is not an editable rule. To apply
other behavior, configure a rule that traffic will match so the ZyWALL will
not have to use the default policy.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Click the Add icon in the heading row to open a screen where you can
add a new rule. Refer to
fields.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display
asking you to confirm that you want to delete the rule. Note that
subsequent rules move up by one when you take this action.
Click the Move to N icon to display a field to type a number for where
you want to put that rule and press [ENTER] to move the rule to the
number that you typed.
Select the check box to allow or disallow the computer with the IP
address that matches the IP address(es) in the Service Control table to
access the ZyWALL Web Configurator using HTTP connections.
You may change the server port number for a service if needed, however
you must use the same port number in order to use that service to
access the ZyWALL.
Table 232 on page 720 for information on the
ZyWALL USG 2000 User's Guide