ZyXEL Communications ZyWall USG 2000 User Manual page 771

Table 248 Maintenance > Log > Log Setting > Edit (System Log) (continued)
LABEL
System log
E-mail
Server 1
E-mail
Server 2
Log
Consolidation
Active
Log
Consolidation
Interval
OK
Cancel
ZyWALL USG 2000 User's Guide
DESCRIPTION
Select which events you want to log by Log Category (except All
Logs; see below). There are three choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green checkmark) - create log messages and
alerts from this category
enable normal logs and debug logs (yellow checkmark) - create log
messages, alerts, and debugging information from this category; the
ZyWALL does not e-mail debugging information, however, even if this
setting is selected.
If you select one of the check boxes for All Logs, it affects the settings
for every category.
Select whether this category of events should be included in the log
messages when it is e-mailed (green checkmark) and/or in alerts
(yellow exclamation point) for the e-mail settings specified in E-Mail
Server 1. The ZyWALL does not e-mail debugging information, even if
it is recorded in the System log.
Select whether this category of events should be included in log
messages when it is e-mailed (green checkmark) and/or in alerts
(yellow exclamation point) for the e-mail settings specified in E-Mail
Server 2. The ZyWALL does not e-mail debugging information, even if
it is recorded in the System log.
Select this to activate log consolidation. Log consolidation aggregates
multiple log messages that arrive within the specified Log
Consolidation Interval. In the View Log tab, the text "[count=x]",
where x is the number of original log messages, is appended at the end
of the Message field, when multiple log messages were aggregated.
Type how often, in seconds, to consolidate log information. If the same
log message appears multiple times, it is aggregated into one log
message with the text "[count=x]", where x is the number of original
log messages, appended at the end of the Message field.
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
Chapter 48 Logs
771