Chapter 19 IP/MAC Binding
19.1.2 What You Need to Know About IP/MAC Binding
DHCP
IP/MAC address bindings are based on the ZyWALL's dynamic and static DHCP
entries.
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding
with Ethernet, bridge, and VLAN interfaces. You can also enable or disable IP/MAC
binding and logging in an interface's configuration screen.
19.2 IP/MAC Binding Summary
Click Network > IP/MAC Binding to open the IP/MAC Binding Summary
screen. This screen lists the total number of IP to MAC address bindings for
devices connected to each supported interface.
Figure 191 Network > IP/MAC Binding > Summary
The following table describes the labels in this screen.
Table 91 Network > IP/MAC Binding > Summary
LABEL
#
Interface
Number of
Binding
302
DESCRIPTION
This is the index number of the interface.
This is the name of an interface that supports IP/MAC binding.
This field displays the interface's total number of IP/MAC bindings and IP
addresses that the interface has assigned by DHCP.
ZyWALL USG 2000 User's Guide