ZyXEL Communications ZyWall USG 2000 User Manual page 135

• Select Add corresponding Policy Route rule for NAT Loopback to allow
local users to use a domain name to access the HTTP server. See
Example on page 282
Figure 100 Creating the Virtual Server
The firewall allows traffic from the WAN zone to the DMZ zone by default so your
configuration is done. Now the public can go to IP address 1.1.1.2 to access the
HTTP server. If a domain name is registered for IP address 1.1.1.2, users can just
go to the domain name to access the web server.
ZyWALL USG 2000 User's Guide
for details.
Chapter 6 Tutorials
NAT Loopback
135