ZyXEL Communications ZyWall USG 2000 User Manual page 857

Table 284 Connectivity Check Logs (continued)
LOG MESSAGE
Can't use MULTICAST IP
for destination
The destination is
invalid, because
destination IP is
broadcast IP
Can't get MAC address
of %s interface!
To send ARP REQUEST
error!
The %s routing status
seted to DEAD by
connectivity-check
The %s routing status
seted ACTIVATE by
connectivity-check
The link status of %s
interface is inactive
Table 285 Device HA Logs
LOG MESSAGE
Device HA VRRP Group
%s has been added.
Device HA VRRP group
%s has been modified.
Device HA VRRP group
%s has been deleted.
Device HA VRRP
interface %s for VRRP
Group %s has changed.
Device HA syncing from
%s starts.
%s has no file to
sync, Skip syncing it
for %s.
Master configuration
is the same with
Backup. Skip updating
it.
ZyWALL USG 2000 User's Guide
DESCRIPTION
The connectivity check process can't use multicast address to
check link-status.
The connectivity check process can't use broadcast address to
check link-status.
The connectivity check process can't get MAC address of
interface.
%s: interface name
The connectivity check process can't send ARP request
packet.
The interface routing can't forward packet.
%s: interface name
The interface routing can forward packet.
%s: interface name
The specified interface failed a connectivity check.
DESCRIPTION
An VRRP group has been created, %s: the name of VRRP
group.
An VRRP group has been modified, %s: the name of VRRP
group.
An VRRP group has been deleted, %s: the name of VRRP
group.
Configuration of an interface that belonged to a VRRP group
has been changed, 1st %s: VRRP interface name, 2ed %s:
%s: the name of VRRP group.
Device HA Syncing from Master starts when user click "Sync
Now" using Auto Sync, %s: The IP of FQDN of Master.
There is no file to be synchronized from the Master when
syncing a object (AV/AS/IDP/Certificate/System
Configuration), But in fact, there should be something in the
Master for the device to synchronize with, 1st %s: The
syncing object, 2ed %s: The feature name for the syncing
object.
The System Startup configuration file synchronized from the
Master is the same with the one in the Backup, so the
configuration does not have to be updated.
Appendix A Log Descriptions
857