ZyXEL Communications ZyWall USG 2000 User Manual page 840

Appendix A Log Descriptions
Table 276 Application Patrol (continued)
MESSAGE
Protocol %s has been
enabled.
Protocol %s has been
disabled.
Classification mode of
protocol %s has been
modified to portless.
Classification mode of
protocol %s has been
modified to portbase.
Bandwidth graph of
protocol %s has been
enabled.
Bandwidth graph of
protocol %s has been
disabled.
Default port %s of
protocol %s has been
added.
Default port %s of
protocol %s has been
removed.
Rule %s:%s has been
moved to index %s.
Rule %s:%s has been
removed.
System fatal error:
60011001.
System fatal error:
60011002.
System fatal error:
60011003.
System fatal error:
60011004.
840
EXPLANATION
The listed protocol has been turned on in the application
patrol.
The listed protocol has been turned off in the application
patrol.
The device will now use the portless classification mode to
identify the listed protocol's traffic.
The device will now use the port-based classification mode
to identify the listed protocol's traffic.
The bandwidth graph has been turned on for the listed
protocol's traffic.
The bandwidth graph has been turned off for the listed
protocol's traffic.
The listed default port (first %s) has been added for the
listed protocol (second %s).
The listed default port (first %s) has been deleted for the
listed protocol (second %s).
An application patrol rule has been moved.
1st %s: Protocol name
2nd %s: From rule index number
3rd %s: To rule index number
An application patrol rule has been deleted.
1st %s: Protocol name
2nd %s: From rule index number
3rd %s: To rule index number
The device failed to initiate the application patrol daemon.
The device failed to get the application patrol protocol list.
The device failed to initiate XML.
The device failed to turn application patrol off while the
system was initiating.
ZyWALL USG 2000 User's Guide