ZyXEL Communications ZyWall USG 2000 User Manual page 196

Chapter 10 Interfaces
The following table describes the labels in this screen.
Table 54 Interface > Cellular > Add
LABEL
General Settings
Enable
Interface
Interface
Properties
Interface
Name
Zone
Extension Slot
Connected
Device
Description
Connectivity
Nailed-Up
Idle timeout
ISP Settings
Profile
Selection
APN
Dial String
196
DESCRIPTION
Select this option to turn on this interface.
This field is read-only. This is the name of the cellular interface.
Select the zone to which you want the cellular interface to belong. The
zone determines the security settings the ZyWALL uses for the
interface.
This is the PCMCIA or USB slot that you are configuring for use with a
3G card.
This displays the manufacturer and model name of your 3G card if
you inserted one in the ZyWALL. Otherwise, it displays none.
Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
()+/:=?!*#@$_%-
up to 60 characters long.
Select this if the connection should always be up. Clear this to have
the ZyWALL to establish the connection only when there is traffic. You
might not nail up the connection if there is little traffic through the
interface or if it costs money to keep the connection available.
This value specifies the time in seconds (0~360) that elapses before
the ZyWALL automatically disconnects from the ISP's server. Zero
disables the idle timeout.
Select Device to use one of the 3G device's profiles of device
settings. Then select the profile (use Profile 1 unless your ISP
instructed you to do otherwise).
Select Custom to configure your device settings yourself.
This field is read-only if you selected Device in the profile selection.
Select Custom in the profile selection to be able to manually input
the APN (Access Point Name) provided by your service provider. This
field applies with a GSM or HSDPA 3G card. Enter the APN from your
service provider. Connections with different APNs may provide
different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
You can enter up to 63 ASCII printable characters. Spaces are
allowed.
Enter the dial string if your ISP provides a string, which would include
the APN, to initialize the 3G card.
You can enter up to 63 ASCII printable characters. Spaces are
allowed.
This field is available only when you insert a GSM 3G card.
characters, and it can be
ZyWALL USG 2000 User's Guide