ZyXEL Communications ZyWall USG 2000 User Manual page 853

Table 283 System Logs (continued)
LOG MESSAGE
Device is rebooted by
administrator!
Insufficient memory.
Connect to dyndns
server has failed.
Update the profile %s
has failed because of
strange server
response.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update the profile %s
has succeeded.
Update the profile %s
has failed because the
FQDN %s is invalid.
Update the profile %s
has failed because the
FQDN %s is malformed.
Update the profile %s
has failed because the
FQDN %s is not under
your control.
Update the profile %s
has failed because the
FQDN %s was blocked
for abuse.
Update the profile %s
has failed because of
authentication fail.
Update the profile %s
has failed because of
invalid system
parameters.
Update the profile %s
has failed because the
FQDN %s was blocked.
Update the profile %s
has failed because too
many or too few hosts
found.
Update the profile %s
has failed because of
dyndns internal error
ZyWALL USG 2000 User's Guide
DESCRIPTION
An administrator restarted the device.
Cannot allocate system memory.
Cannot connect to members.dyndns.org to update DDNS.
Update profile failed because the response was strange, %s is
the profile name.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update profile succeeded, %s is the profile name.
Update profile failed because FQDN for the profile is invalid
for DynDNS, 1st %s is the profile name, 2nd %s is the FQDN
of the profile.
The FQDN format is malformed for DynDNS server, 1st %s is
the profile name, 2nd %s is the FQDN of the profile.
The owner of this FQDN is not the user, 1st %s is the profile
name, 2nd %s is the FQDN of the profile.
The FQDN is blocked by DynDNS, 1st %s is the profile name,
2nd %s is the FQDN of the profile.
Try to update profile, but failed, because of authentication
fail, %s is the profile name.
Some system parameters are invalid to update FQDN, %s is
the profile name.
The FQDN is blocked by DynDNS , 1st %s is the profile name,
2nd %s is the FQDN of the profile.
%s is the profile name.
Update profile failed because of a dynsdns internal error, %s
is the profile name.
Appendix A Log Descriptions
853