ZyXEL Communications ZyWall USG 2000 User Manual page 846

Appendix A Log Descriptions
Table 279 Firewall Logs (continued)
LOG MESSAGE
Firewall %s %s rule %d
was %s.
Firewall %s %s rule %d
has been moved to %d.
Firewall %s %s rule %d
has been deleted.
Firewall %s %s rules
have been flushed.
abnormal TCP flag
attack detected
invalid state detected Invalid state detected
The Asymmetrical Route
has been enabled.
The Asymmetrical Route
has been disabled.
Table 280 Sessions Limit Logs
LOG MESSAGE
Maximum sessions per
host (%d) was
exceeded.
Table 281 Policy Route Logs
LOG MESSAGE
Can't open bwm_entries Policy routing can't activate BWM feature.
Can't open link_down
Cannot get handle from
UAM, user-aware PR is
disabled
mblock: allocate
memory failed!
pt: allocate memory
failed!
To send message to
policy route daemon
failed!
The policy route %d
allocates memory fail!
846
DESCRIPTION
1st %s is from zone, 2nd %s is to zone, %d is the index of
the rule
3rd %s is appended/inserted/modified
1st %s is from zone, 2nd %s is to zone, 1st %d is the old
index of the rule
2nd %d is the new index of the rule
1st %s is from zone, 2nd %s is to zone, %d is the index of
the rule
1st %s is from zone, 2nd %s is to zone
Abnormal TCP flag attack detected
Asymmetrical route has been turned on.
Asymmetrical Route has been turned off.
DESCRIPTION
%d is maximum sessions per host.
DESCRIPTION
Policy routing can't detect link up/down status.
User-aware policy routing is disabled due to some reason.
Allocating policy routing rule fails: insufficient memory.
Allocating policy routing rule fails: insufficient memory.
Failed to send control message to policy routing manager.
Allocating policy routing rule fails: insufficient memory.
%d: the policy route rule number
ZyWALL USG 2000 User's Guide