Remote User Login - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 23 SSL User Screens
System Requirements
Here are the browser and computer system requirements for remote user access.
• Windows 2000, Vista, or a 32-bit version of XP or 2003
• Internet Explorer 5.5 and above (for Internet Explorer 7 or 8, JRE 1.6 must be
enabled)
• Using RDP requires Internet Explorer
• Netscape 7.2 and above
• Firefox 1.0 and above
• Mozilla 1.7.3 and above
• Sun's Java (Java Runtime Environment or 'JRE') installed and enabled with a
minimum version of 1.4.
Required Information
A remote user needs the following information from the network administrator to
log in and access network resources.
• the domain name or IP address of the ZyWALL
• the login account user name and password
• if also required, the user name and/or password to access the network resource
Certificates
The remote user's computer establishes an HTTPS connection to the ZyWALL to
access the login screen. If instructed by your network administrator, you must
install or import a certificate (provided by the ZyWALL or your network
administrator). Refer to
Finding Out More
See Chapter 22 on page 371

23.2 Remote User Login

This section shows you how to access and log into the network through the
ZyWALL. Example screens for Internet Explorer are shown.
384
Appendix D on page 885
for how to configure SSL VPN on the ZyWALL.
for more information.
ZyWALL USG 2000 User's Guide