Internet Access: Pptp Encapsulation - ZyXEL Communications ZyWall USG 2000 User Manual

4.2.3 Internet Access: PPTP Encapsulation

Configure your PPTP and IP address settings and click Next to apply the
configuration settings. This configures the ZyWALL to access the Internet.
Figure 25 Internet Access: PPTP Encapsulation
The following table describes the labels in this screen.
Table 10 Internet Access: PPTP Encapsulation
LABEL
ISP Parameters
Encapsulation
Authentication
Type
User Name
Password
ZyWALL USG 2000 User's Guide
DESCRIPTION
This displays the type of Internet connection you are configuring.
Use the drop-down list box to select an authentication protocol for
outgoing calls. Options are:
CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when
requested by this remote node.
CHAP - Your ZyWALL accepts CHAP only.
PAP - Your ZyWALL accepts PAP only.
MSCHAP - Your ZyWALL accepts MSCHAP only.
MSCHAP-V2 - Your ZyWALL accepts MSCHAP-V2 only.
Type the user name given to you by your ISP. You can use
alphanumeric and -_
@$./
characters long.
Type the password associated with the user name above. Use up to 64
ASCII characters except the [] and ?. This field can be blank.
Chapter 4 Wizard Setup
characters, and it can be up to 31
65