ZyXEL Communications ZyWall USG 2000 User Manual page 152

Chapter 7 Status
UTM performance. See the SEM User's Guide for how to install an SEM. To access
this screen, click the SEM card's Detail icon in the Status screen.
Figure 110 Status > SEM Detail
The following table describes the labels in this screen.
Table 38 Status > SEM Detail
LABEL
Extension Slot
Device Type
Status
152
DESCRIPTION
This shows to which slot the SEM card is connected.
This displays what kind of SEM card is installed.
SEM-VPN - The VPN accelerator. The SEM-VPN provides 500 Mbps VPN
throughput, 2,000 IPSec VPN tunnels, and 750 SSL VPN users.
SEM-UTM - UTM accelerator. The SEM-UTM provides 400 Mbps anti-
virus and IDP throughput.
SEM-DUAL - accelerator for both VPN and UTM. The SEM-DUAL
provides the benefits of both the ZyWALL-UTM and ZyWALL-VPN.
This field displays one of the following.
Active - The SEM card is working properly.
Ready to activate - The SEM was inserted while the ZyWALL was
operating. Restart the ZyWALL to use the SEM.
Driver load failed - An error occurred during the ZyWALL's attempt to
activate the SEM card. Make sure the SEM is installed properly and the
thumbscrews are tightened. If this status still displays, contact your
vendor.
ZyWALL USG 2000 User's Guide