Tutorials; Chapter 6 Tutorials; How To Configure Interfaces, Port Grouping, And Zones - ZyXEL Communications ZyWall USG 2000 User Manual

C
H A P T E R
This chapter provides some examples of using the Web Configurator to set up
features in the ZyWALL. See also
configuring L2TP.
6.1 How to Configure Interfaces, Port Grouping,
and Zones
This tutorial shows how to configure Ethernet interfaces, port grouping, and zones
for the following example configuration (see
default configuration).
• Interface ge2 uses a static IP address of 1.2.3.4 and is in the WAN zone.
• DMZ servers are connected to ports P4 and P5 and need full wire speed
communication with each other, so ports P4 and P5 are combined into a ge4
interface port group. It uses IP address 192.168.2.1.
ZyWALL USG 2000 User's Guide
Chapter 28 on page 413
Section 5.2.2 on page 88
6

Tutorials

for an example of
for the
103