Feature Configuration Overview; Feature; Interface - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 5 Configuration Basics

5.4 Feature Configuration Overview

This section provides information about configuring the main features in the
ZyWALL. The features are listed in the same sequence as the menu item(s) in the
Web Configurator. Each feature is organized as shown below.

5.4.1 Feature

This provides a brief description. See the appropriate chapter(s) in this User's
Guide for more information about any feature.
MENU ITEM(S)
PREREQUISITES
WHERE USED
Example: This provides a simple example to show you how to configure this
feature. The example is usually based on the network topology in
page 88.
Note: PREQUISITES or WHERE USED does not appear if there are no prerequisites
or references in other features to this one. For example, no other features
reference DDNS entries, so there is no WHERE USED entry.

5.4.2 Interface

See Section 5.2 on page 86
Note: When you create an interface, there is no security applied on it until you assign
it to a zone.
90
This shows you the sequence of menu items and tabs you should click
to find the main screen(s) for this feature. See the web help or the
related User's Guide chapter for information about each screen.
These are other features you should configure before you configure
the main screen(s) for this feature.
If you did not configure one of the prerequisites first, you can often
select an option to create a new object. After you create the object
you return to the main screen to finish configuring the feature.
You may not have to configure everything in the list of prerequisites.
For example, you do not have to create a schedule for a policy route
unless time is one of the criterion.
There are two uses for this.
These are other features you should usually configure or check right
after you configure the main screen(s) for this feature. For example,
you should usually create a policy route for a VPN tunnel.
You have to delete the references to this feature before you can delete
any settings. For example, you have to delete (or modify) all the
policy routes that refer to a VPN tunnel before you can delete the VPN
tunnel.
for background information.
Figure 42 on
ZyWALL USG 2000 User's Guide