Table of Contents
Advertisement
Chapter 29 Addresses
The following table describes the labels in this screen. See
more information as well.
Table 167 Object > Address > Address Group
LABEL
#
Name
Description
Add icon
29.3.1 Address Group Add/Edit Screen
The Address Group Add/Edit screen allows you to create a new address group or edit an
existing one. To access this screen, go to the Address Group screen (see
459), and click either the Add icon or an Edit icon.
Figure 377 Object > Address > Address Group > Add
The following table describes the labels in this screen.
Table 168 Object > Address > Address Group > Add
LABEL
Name
Description
460
DESCRIPTION
This field is a sequential value, and it is not associated with a specific address
group.
This field displays the name of each address group.
This field displays the description of each address group, if any.
This column provides icons to add, edit, and remove address groups.
To add an address group, click the Add icon at the top of the column. The Address
Group Add/Edit screen appears.
To edit an address group, click the Edit icon next to the address group. The
Address Group Add/Edit screen appears.
To delete an address group, click on the Remove icon next to the address group.
The web configurator confirms that you want to delete the address group.
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores(
), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
This field displays the description of each address group, if any. You can use up to
60 characters, punctuation marks, and spaces.
Section 29.3.1 on page 460
Section 29.3 on page
ZyWALL USG 50-H User's Guide
for
Advertisement
Table of Contents
Troubleshooting
