ZyXEL Communications ZyWall USG 2000 User Manual page 703

also a software mechanism to set the time manually or get the current time and
date from an external server.
To change your ZyWALL's time based on your local time zone and date, click
System > Date/Time. The screen displays as shown. You can manually set the
ZyWALL's time and date or have the ZyWALL get the date and time from a time
server.
Figure 462 System > Date and Time
The following table describes the labels in this screen.
Table 223 System > Date and Time
LABEL
Current Time and
Date
Current Time
Current Date
Time and Date
Setup
Manual
New Time (hh-
mm-ss)
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field displays the present time of your ZyWALL.
This field displays the present date of your ZyWALL.
Select this radio button to enter the time and date manually. If you
configure a new time and date, time zone and daylight saving at the
same time, the time zone and daylight saving will affect the new time
and date you entered. When you enter the time settings manually, the
ZyWALL uses the new setting once you click Apply.
This field displays the last updated time from the time server or the
last time configured manually.
When you set Time and Date Setup to Manual, enter the new time
in this field and then click Apply.
Chapter 46 System
703