ZyXEL Communications ZyWall USG 2000 User Manual page 641

To access this screen, log in to the Web Configurator, and click Object > Service
> Service Group.
Figure 428 Object > Service > Service Group
The following table describes the labels in this screen. See
642 for more information as well.
Table 197 Object > Service > Service Group
LABEL
#
Name
Description
Add icon
ZyWALL USG 2000 User's Guide
DESCRIPTION
This field is a sequential value, and it is not associated with a specific
service group.
This field displays the name of each service group.
By default, the ZyWALL uses services starting with "Default_Allow_" in
the firewall rules to allow certain services to connect to the ZyWALL.
This field displays the description of each service group, if any.
This column provides icons to add, edit, and remove service groups.
To add a service group, click the Add icon at the top of the column. The
Service Group Add/Edit screen appears.
To edit a service group, click the Edit icon next to the service group. The
Service Group Add/Edit screen appears.
To delete a service group, click on the Remove icon next to the service
group. The Web Configurator confirms that you want to delete the
service group.
Chapter 39 Services
Section 39.3.1 on page
641