ZyXEL Communications ZyWall USG 2000 User Manual page 214

Unified security gateway
Hide thumbs Also See for ZyWall USG 2000:
Table of Contents

Advertisement

Chapter 10 Interfaces
Table 62 Network > Interface > Bridge > Edit (continued)
LABEL
Metric
Related Setting
Configure
WAN TRUNK
Configure
Policy Route
More Settings/
Less Settings
Interface
Parameters
Egress
Bandwidth
Ingress
Bandwidth
MTU
DHCP Settings
DHCP
Relay Server 1 Enter the IP address of a DHCP server for the network.
Relay Server 2 This field is optional. Enter the IP address of another DHCP server for
214
DESCRIPTION
Enter the priority of the gateway (if any) on this interface. The
ZyWALL decides which gateway to use based on this priority. The
lower the number, the higher the priority. If two or more gateways
have the same priority, the ZyWALL uses the one that was configured
first.
Click WAN TRUNK to go to a screen where you can configure the
interface as part of a WAN trunk for load balancing.
Click Policy Route to go to the screen where you can manually
configure a policy route to associate traffic with this interface.
Click this button to display a greater or lesser number of configuration
fields.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can send through the interface to the network. Allowed
values are 0 - 1048576.
This is reserved for future use.
Enter the maximum amount of traffic, in kilobits per second, the
ZyWALL can receive from the network through the interface. Allowed
values are 0 - 1048576.
Maximum Transmission Unit. Type the maximum size of each data
packet, in bytes, that can move through this interface. If a larger
packet arrives, the ZyWALL divides it into smaller fragments. Allowed
values are 576 - 1500. Usually, this value is 1500.
Select what type of DHCP service the ZyWALL provides to the
network. Choices are:
None - the ZyWALL does not provide any DHCP services. There is
already a DHCP server on the network.
DHCP Relay - the ZyWALL routes DHCP requests to one or more
DHCP servers you specify. The DHCP server(s) may be on another
network.
DHCP Server - the ZyWALL assigns IP addresses and provides
subnet mask, gateway, and DNS server information to the network.
The ZyWALL is the DHCP server for the network.
These fields appear if the ZyWALL is a DHCP Relay.
the network.
These fields appear if the ZyWALL is a DHCP Server.
ZyWALL USG 2000 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall usg 1000

Table of Contents