Status; Chapter 7 Status; Overview; What You Can Do In The Status Screens - ZyXEL Communications ZyWall USG 2000 User Manual

C
H A P T E R

7.1 Overview

Use the Status screens to check status information about the ZyWALL.

7.1.1 What You Can Do in the Status Screens

Use the Status screens for the following.
• Use the main Status screen (see
general device information, system status, system resource usage, licensed
service status, and interface status. You can also go to the other status screens
for more information.
• Use the VPN status screen (see
tunnels that are currently established.
• Use the DHCP Table screen (see
addresses currently assigned to DHCP clients and the IP addresses reserved for
specific MAC addresses.
• Use the Port Statistics screen (see
packet statistics for each physical port. To access this screen, click Port
Statistics in the Status screen.
• Use the Port Statistics Graph screen (see
at a line graph of packet statistics for each physical port.
• Use the Current Users screen (see
of the users currently logged into the ZyWALL.
• Use the SEM Status Detail screen (see
detailed status information for an installed SEM (Security Extension Module)
card.
ZyWALL USG 2000 User's Guide
Section 7.2 on page 138) to see the ZyWALL's
Section 7.2.1 on page 144) to look at the VPN
Section 7.2.5 on page
Section 7.2.7 on page
Section 7.2.7 on page
Section 7.2.8 on page
Section 7.2.9 on page
7

Status

148) to look at the IP
150) to look at
150) to look
151) to look at a list
151) to look at
137