ZyXEL Communications ZyWall USG 2000 User Manual page 356

Chapter 21 IPSec VPN
Each field is described in the following table.
Table 111 VPN > IPSec VPN > Concentrator > Edit
LABEL
Name
#
Member
Add icon
OK
Cancel
356
DESCRIPTION
Enter the name of the concentrator. You may use 1-31 alphanumeric
characters, underscores(
cannot be a number. This value is case-sensitive.
This field is a sequential value, and it is not associated with a specific
member in the concentrator.
This field displays the name of each member in the concentrator.
Note: You must disable policy enforcement in each member. See
Section 21.2.1 on page
Click the Popup icon to change this member in the group. The
following screen appears.
IPSec VPN connection policies that do not belong to a VPN concentrator
appear on the left. Select any VPN connection policies that you want to
add to the VPN concentrator and click the right arrow button to add
them.
The VPN concentrator's member VPN connections appear on the right.
Select any VPN connections that you want to remove from the VPN
concentrator, and click the left arrow button to remove them.
Figure 219 Network > IPSec VPN > Concentrator > Edit >
Member
This column provides icons to add members to and remove members
from the concentrator.
Click an Add icon at the top of the column to add a new member at the
beginning of the list, or click the Add icon next to an existing member
to add a new member after the existing one. The Member List screen
appears. See the member Popup description for more details.
To remove a member from the concentrator, click on the Remove icon
next to the member. The Web Configurator confirms that you want to
remove the member.
Click OK to save your changes in the ZyWALL.
Click Cancel to exit this screen without saving.
), or dashes (-), but the first character
_
334.
ZyWALL USG 2000 User's Guide