Static Dhcp Edit - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 19 IP/MAC Binding
Table 92 Network > IP/MAC Binding > Edit (continued)
LABEL
#
IP Address
MAC Address
Description
Add icon
OK
Cancel

19.2.2 Static DHCP Edit

Click Network > IP/MAC Binding > Edit to open the IP/MAC Binding Edit
screen. Click the Add or Edit icon to open the following screen. Use this screen to
configure an interface's IP to MAC address binding settings.
Figure 193 Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
Table 93 Network > IP/MAC Binding > Edit > Add
LABEL
Interface
Name
IP Address
MAC Address
Description
OK
Cancel
304
DESCRIPTION
This is the index number of the static DHCP entry.
This is the IP address that the ZyWALL assigns to a device with the
entry's MAC address.
This is the MAC address of the device to which the ZyWALL assigns the
entry's IP address.
This helps identify the entry.
Click the Add icon to add a new entry.
Click the Edit icon to go to the screen where you can edit the entry.
Click the Remove icon to delete an entry. A window displays asking you
to confirm that you want to delete it.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
DESCRIPTION
This field displays the name of the interface within the ZyWALL and the
interface's IP address and subnet mask.
Enter the IP address that the ZyWALL is to assign to a device with the
entry's MAC address.
Enter the MAC address of the device to which the ZyWALL assigns the
entry's IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For
example, you may want to list the computer's owner.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
ZyWALL USG 2000 User's Guide