ZyXEL Communications ZyWall USG 2000 User Manual page 73

The following table describes the labels in this screen.
Table 13 VPN Express Wizard: Step 2
LABEL
Rule Name
Site-to-site
Site-to-site
with Dynamic
Peer
Remote
Access
(Server Role)
Remote
Access
(Client Role)
Back
Next
Figure 33 VPN Express Wizard: Step 3
ZyWALL USG 2000 User's Guide
DESCRIPTION
Type the name used to identify this VPN connection (and VPN gateway).
You may use 1-31 alphanumeric characters, underscores(
), but the first character cannot be a number. This value is case-sensitive.
Choose this if the remote IPSec router has a static IP address or a domain
name. This ZyWALL can initiate the VPN tunnel.
Choose this if the remote IPSec router has a dynamic IP address. Only the
remote IPSec router can initiate the VPN tunnel.
Choose this to allow incoming connections from IPSec VPN clients. The
clients have dynamic IP addresses and are also known as dial-in users.
Only the clients can initiate the VPN tunnel.
Choose this to connect to an IPSec server. This ZyWALL is the client (dial-
in user) and can initiate the VPN tunnel.
Click Back to return to the previous screen.
Click Next to continue.
Chapter 4 Wizard Setup
), or dashes (-
_
73